Telenav for AT&T Supported Devices: v5.1 for BlackBerry 8100, 8300, 8310, 8700, 8800 - Manual (Page 20)

© TELENAV, INC. 2003-2007 PAGE 20 OF 51
NOTE: You can change your Navigation Options while in navigation
mode. See page for
24 further details.
Address – Calling In
The auto voice entry system in TeleNav can be utilized two different
ways:
• Before starting TeleNav, call the Voice Address Input System at
408-523-1429 or 877-886-9762 and dictate your address as
prompted, or
• Select the “Call in an Address” option on the Drive To menu as
described below.
1. On the Drive To menu, highlight Address and click the trackball to
expose the menu. Then choose Call in Address. This places a call
to the TeleNav server.
2. Follow the voice prompts to dictate your address.
3. After you have entered the address, click the trackball and choose
End Call. You will return to the screen where you left off.
4. The address is automatically saved to your Recent Places list.
NOTE: If you have never placed a call on your new device, the “Call in
Address” feature may not work. To resolve this issue, simply place a call
from the device’s Applications menu. When prompted, type in your home
area code and continue with the call. The “Call in Address” feature will now
work after you re-launch TeleNav.
The following section contains an example of what you might hear and say when using the Call In option for
entering an address:
TeleNav GPS Navigator prompt> Welcome to TeleNav! Let’s get your destination. Is it a street address, an
intersection, or an airport?
Your response> Street Address
TeleNav GPS Navigator prompt> OK. Tell me the 5 digit ZIP code, or the city and state, like Los Angeles,
California.