beautypg.com

Auto Page RS-622 User Manual

Page 11

background image

11

For Regular Remote Control Transmitter:
1. Prior to pushing any button on the transmitter. Press the Select II

button first on the standard transmitter.

2. Once II button is pressed the LED on the transmitter will illuminate for

3.5 seconds. While the LED is illuminated, press the button for the
function you want to operate on the standard remote transmitter to
control a second vehicle security system.


For 2-way LCD Remote Control Transceiver:
2nd

Car Operation: While the “II” icon display on the LCD screen, you

can remote control and communicate with a second Autopage AM
frequency security system. It has two short “beep” sounds while pressing
any button of the LCD screen transceiver

1. Press and hold all four remote control buttons

simultaneously unit one long beep is heard. LCD
Programming has now been entered.

2. Within 5 seconds press and hold

button until two

beeping sounds are heard and the “II” icon will display on
the LCD screen to indicate the second transceiver pin code
has been initiated.

3. To exit programming mode, take no action for five seconds.

The remote control will generate two long beeps to indicate
programming mode has been exited.


Back to first Car Operation:

This will allow you to control and communicate with the first vehicles
security system.

1. Press and hold all four remote control buttons simultaneously

unit one long beep is heard. Programming has now been
entered.

2. Within 5 seconds press and hold button until one beep

sound is heard.

3. To exit programming mode, take no action for five seconds.

The remote control will generate two long beeps to indicate
programming mode has been exited.



Vibration / Melody Mode:
Vibration mode is useful when you are in a noisy place and it is difficult
to hear the beep sound from the remote control. In this mode the unit will
vibrate if your security system is triggered.