Using the controls – 2 speed, Combo models, Select water level – Amana NAV-1 User Manual

Page 6: Select wash/rinse temperature, Step 1 step 2

Hot/Cold

White and heavily soiled, color-fast
items.

Warm/Warm

Moderately soiled, colored items.

Warm/Cold

Moderately soiled, colored items;
most permanent press items.

Cold/Cold

Brightly colored, lightly soiled
items; washable woolens.

Using the Controls – 2 Speed

Combo Models

Select Water Level

Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.

It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to reset and then back
to the desired setting.

Select Wash/Rinse Temperature

Your washer gives you a choice of hot, warm or cold
water for washing and cold or warm water (select
models) for rinsing. Use the chart below as a guide.

STEP

WATER LEVEL SETTING

LOAD SIZE

Small

1/4 - 1/3

Medium

1/3 – 1/2

Large

1/2 – 2/3

Super

2/3 – Full

Note:

Items must circulate freely for best results.

Note:

In wash water temperatures below 60

detergents do not dissolve well or clean well. Care
labels define cold water as up to 85

WASH/RINSE

LOAD TYPE

TEMPS