Speedtech Nova Subframe - Manual (Page 6)

6 | P a g e
5. Remove Steering rack from packaging. You will not be using the long lower
control arm (LCA) mounting bolts that come with the rack hardware. Instead use
the Speedtech Grade 8, 4 1/2” long mounting bolts supplied with the control
arms.
You must remove the rack from the mounting bracket to get the driver side bolt
into it's position in the bracket. Apply anti-seize lubricant to the shank of the bolts,
install into bracket, then reinstall bracket onto rack body.
For proper alignment, refer to the installation instructions included with the rack
and pinion. The 2 mounting bolts must go in at the same time (see photo above)
and the bracket and spacers must end up flush against the frame. It may take 2
people to perform this procedure, it is a tight fit.