Speedtech 67-69 Camaro Chicane Coilover - Manual (Page 8)

8 | P a g e
Torque Specs

Lower control arm nuts 40 ft/lbs

Upper control arm nuts 40 ft/lbs

Upper shock mount 30 ft/lbs

Lower T bar mounting nuts 40 ft/lbs.
Be sure to double check all the fasteners! Set the car to the approximate
ride height by adjusting the shock lower spring nuts. This should be done
before aligning the car.
Note: Do not drive the car until an alignment has been performed by a
COMPETANT alignment or race car shop. Note: Use alignment specifications
on the next page, not alignment shop pre-programmed factory specs!