SIGMA PC 3 User Manual
Page 19
16
5. Basic settings
Set Clock (
PC3
/
PC7
)
• Press MODE key until CLK appears at top of display
• Hold SET key for 2 seconds until the word "hold” disappears
and you get the blinking clock format
• Press SET key to select 12 /24 h display and confirm with
MODE.
• Press MODE to select hours and minutes, set flashing section
with SET key.
• To complete and quit the setting press MODE key
Set Date (
PC7
)
• Press MODE key until date appears in the display
• Press and hold SET key for 2 seconds until the word "hold”
disappears and you get the blinking year format
• Press MODE to select year, month and day, set flashing
section with SET key.
• To quit the setting press MODE 1 key
Stopwatch (
PC3
/
PC7
)
• Press MODE to enter STP display
• Press CHRONO to start and Stop
• Press CHRONO 2 Sec for RESET
Alarm (
PC7
)
• Press ALARM key for sound on/off