SIGMA PC 22.13 - Manual (Page 3)

3
US/GB
1
2
Button functions
Activating the PC 22.13
You will receive your PC 22.13 in a transport mode in
which the battery consumption is extremely low. Before
its first use, you must therefore wake up your PC 22.13.
this can be done as follows:
Press and hold the StArt/StoP/reSet button for five
seconds. the watch now displays the settings menu.
StArt/StoP/
rESEt :
k Start and stop the
stopwatch
k reset the stopwatch
(press and hold)
k Access and confirm
the settings
Press both buttons at the
same time :
k Activate the light function
k Switch from training mode to standby mode
(press and hold)
ModE/
SEt :
k Switch between functions
k Access the settings menu
(press and hold)
k Change the value in the
settings menu