SIGMA MC 1812 MOTO - Manual (Page 12)

Highway acceleration measurement
Basic settings
www.sigmasport.com MC 1812 Page 12
MC 1812
4.2 Highway acceleration measurement
1 Press the
Mode 1
button to switch to the ‘highway acceleration’ menu.
2 Press the
Set
button.
3 ‘Start speed’ and ‘60’ (default value) appear.
4 Press
Mode 2
(+) or
Reset
(-) to set the value you desire.
5 Press the
Set
button.
6 ‘End speed’ and ‘100’ (default value) appear.
7 Press
Mode 2
(+) or
Reset
(-) to set the value you desire.
8 Press the
Set
button.
9 ‘High. accel. time’ appears on the display and flashes.
Press the
Mode 2
or
Reset
button to change the display to ‘High. accel. dst.’
(distance, indicator in m for meters). Set the function you desire.
10 Press the
Set
button to save your setting.
‘Setting OK’ appears on the display.
Explanations about this function can be found in section
„5.7 Highway acceleration measurement“.
4.3 Braking measurement
1 Press the
Mode 1
button to switch to the ‘braking’ menu.
2 Press the
Set
button.
3 ‘Braking’ (m/s²) and the factory default value appears on the display for the
minimum deceleration.
4 Press
Mode 2
(+) or
Reset
(-) to set the value.
5 Press the
Set
button to save your setting.
‘Setting OK’ appears on the display.
Explanations about this function can be found in section
„5.8 Braking measurement“.
Mode 2
Mode 1
Reset
Set
Mode 2
Mode 1
Reset
Set