SIGMA BC 16.12 STS - Manual (Page 16)

16
2.3 STS features
– Synchronization k Attach the BC 16.12 STS to the
bracket – zeros flash for the speed and cadence.
There are two ways of synchronizing the speed /
cadence:
– 1. k Start cycling – the receiver usually
synchronizes with the transmitters after 3-4 wheel /
pedal rotations.
– 2. k Spin the front wheel or turn the pedals until
the speed / cadence values stop flashing.
Removing the BC 16.12 STS from the bracket
severs the connection.
2.2 Special functions
– Hiding total values during the trip k If the BC 16.12/
BC 16.12 STS receives speed signals, all the total
functions (distance, time) are hidden on the display.
If no speed values are received, the functions are
once again displayed.
– Showing and hiding cadence functions k If the
BC 16.12 / BC 16.12 STS are used without the
cadence transmitter, all the cadence functions
(cadence / Ø cadence) are hidden for this trip after
five minutes.
– Trip section (TS) counter k This is a separate
distance / time counter that is manually started and
stopped. The trip section counter makes it possible
to evaluate a trip section or interval training session
without influencing the total values for the trip.
2. Functions / Properties
1 2