SIGMA BC 14.12 STS ALTI - Manual (Page 19)

19
GB/US
2. Functions / Properties
– Calibration using the current altitude k The current
altitude is the altitude of the place at which you are
currently located irrespective of your start altitude
(your trip start location, a mountain hut, or other
locations). The current altitude is used if you are
out on your bike and altitude information is provided.
2.4 STS features
– Synchronization k Attach the BC 14.12 STS ALTI
to the bracket – zeros flash for the speed.
There are two ways of synchronizing the speed:
– 1. k Start cycling – the receiver usually
synchronizes with the transmitter after 3-4 wheel
rotations.
– 2. k Spin the front wheel until the speed values
stop flashing.
Removing the BC 14.12 STS ALTI from the bracket
severs the connection.
1 2