Rocky Mountain Radar Мото-Raptor - Manual (Page 6)

6
COMPONENTS
Your Moto-Raptor package consists of the following components.
(1) Radar Detector
(1) Head Set
(1) Bracket for Radar Detector
(2) Screws and washers for bracket
(2) Dual lock tapes
(5) Locking cable ties
(1) Power cable
(1) Speaker
(1) AC/DC Adaptor
INSTALLATION
Radar Detector: It is very important that the antenna is mounted
properly. Determine the best location for the Radar Detector. The
optimal location for mounting the Radar Detector depends on the
motorcycle’s type.
For Speed Bikes the optimal location is usually found around the cowl
or front or side fairings. Under the cowl is probably the best place if your
motorcycle allows it.
For Cruisers the optimal location is usually found under the headlight.
Choose a location that better suits your motorcycle type. Make sure it
will have a clear view of the road.
Using the supplied mounting bracket, mark location. Drill pilot holes in
the motorcycle if desired and/or necessary. Make sure bracket is
securely fastened.
Avoid placing Radar Detector in a location that will interfere with the
view of the road or the gauges.
Fit the mounting bracket using the washer screws.
Make sure that the lens of the antenna faces in the driving direction.