Powerwinch Deck Mate 19 - Manual (Page 4)

Operating Instructions and Replacement Parts List
4
Deckmate 19 Anchor Winch
Maintenance
The anchor winch does not require any
lubrication. However, the rope must be
checked periodically for abrasion or cuts.
Also check the connection between the
shackle and the rope for wear.
Deckmate 19 Anchor Winch
Technical Information
For technical information regarding the
operation or repair of this product, please
call (800) 243-3097 or write:
Carefree-Powerwinch
2145 West 6th Ave.
Broomfield, CO 80020
Genuine Deckmate 19
Replacement Parts Information
For information regarding where to order
genuine replacement parts, call (800) 243-
3097. Please have available the model
number, serial number, and part number with
description.
General Trouble Shooting Guide for Deckmate 19
Symptom Possible Cause(s) Corrective Action
Anchor Winch will not operate 1. Disconnected, bad wiring, or faulty
circuit breaker.
2. Anchor too heavy.
3. Improper rope rotation.
1. Visually check each electrical connection.
If you are experienced in checking electrical
circuits with a volt meter, you may want
to check each connection with the switch
engaged. Check circuit breaker connection
closely.
2. Use anchors weighing 25 pounds or less.
3. See rope installation instructions. Rope
should wind from over the top of the rope
spool.