Poolmaster 72706 Water Volleyball Game - Manual (Page 2)

A
ssembly I
nstr
uc
tions
2
poolmaster.com
• Connect a 20’’ Blue PVC Pole to a 2.5’’ Coupling. Connect another 20’’ Blue PVC Pole to the
open side of the coupling hole and place another coupling at the end of the second pole.
Connect a third 20’’ Blue PVC Pole to the open hole of the previous coupling.
• Repeat previous steps to ensure that there are 2 different sets of poles with connectors
approximately 60’’ long.
Step 1
• Take 1 of the sets previously assembled and place an Elbow Connector on each end.
(Diagram A)
• Take the second of the sets previously assembled and place a Tee Connector on each end.
(Diagram B)
Step 2
• The set with the Elbow Connectors will be the
top frame. The set with the Tee Connectors will
be the bottom frame. Take the net and slide onto
the poles from the top frame.
Step 3
• Insert a 14.5’’ Blue PVC Pole on each end of the Elbow Connectors. Take the net and slide
onto the 14.5’’ Blue PVC poles.
Step 4
Diagram A
Diagram B