Poolmaster 72775 Water Basketball & Volleyball Comb - Manual (Page 4)

A
ssembly I
nstr
uc
tions
2" Bolt
Game Base
Base
Connector
Corner Ties
4
poolmaster.com
Volleyball Game
Step 1
• Fill both bases with water or sand
and cover openings with caps.
Step 3
• Insert Pole into Base Connector.
(Tap with rubber mallet if needed
and secure with one 2” bolt in
upper hole of the Base Connector
and secure with Hex Nut. Repeat
for second Base.
Step 4
• Place End Caps on top of Poles
Step 5
• Insert Corner Ties of Net through
holes shown and secure to each Pole.
The Net can be shortened by rolling
on Poles or lengthened by extending
the Corner Ties. (for extra stability
secure rope ends beyond Bases with
tent stakes [not included])
Step 2
• Insert the PVC Support into the
Base AT AN ANGLE. (Diagram A)
While pushing Support into the
Base, keep it pulled back a bit to
make sure that Support CLEARS
the metal washer that is built
into the Base at the opening
(Diagram B). Use a Rubber Mallet
if necessary.
• Once the Support is inserted
into the Base, secure through the
2nd hole from the bottom with one
2½” Bolt (Diagram C).
DIAGRAM A
DIAGRAM C
DIAGRAM B
Washer
2 ½" Bolt