Poolmaster 72845 Splashback Poolside Volleyball Combo - Manual (Page 2)

A
ssembly I
nstr
uc
tions
2
poolmaster.com
Step 1
Thread Net on PVC Hoop.
This is the net right out of the package.
You will be working with the longer looped end.
This is a close-up of the circled portion on diagram 1.
This is one loop.
Fold the loop toward you, creating two loops.
Insert your finger through the two loops.
Release the thumb holding the loop in place and pull
on the two middle strings. The loop should slide up
and catch your fingers.
Take the loop from your finger and slide onto the
basketball hoop. Continue this process with each
loop until all loops are on the hoop.
1
1
2
3
4
5
6
2 3
5 6 4
Step 4
• Fill Base with water or sand and
cover up opening with Base Cap.
For best results, use sand to fill base.
Step 5
• Use Ball Needle and a hand pump
(not included) to inflate Ball.
Step 6
• Place NO SLAM DUNK label
on front of Base
Step 3
• Attach the Hoop and Hoop Bracket to the
Backboard and Backboard to the Upright by
inserting (3) 1/4 x 20 x 2 3/4" Bolts through
the Hoop Bracket, Hoop, Backboard and
into Upright. Secure tight.
• Insert Upright into Base. Secure with
(3) 1/4 - 20 x 1" Bolts and Washers.
Step 2
Backboard
Hoop
Bracket
2 ¾"
Bolts (3)
1 " Bolts (3)