Poolmaster 72784 Above-Ground Poolside BBall Game - Manual (Page 2)

A
ssembly I
nstr
uc
tions
2
Step 1
Thread Net on PVC Hoop.
This is the net right out of the package.
You will be working with the longer looped end.
This is a close-up of the circled portion on diagram 1.
This is one loop.
Fold the loop toward you, creating two loops.
Insert your finger through the two loops.
Release the thumb holding the loop in place and pull
on the two middle strings. The loop should slide up
and catch your fingers.
Take the loop from your finger and slide onto the
basketball hoop. Continue this process with each
loop until all loops are on the hoop.
1
1
2
3
4
5
6
2 3
5 6 4
poolmaster.com
• Attach the (2) PVC Upright Supports to the Backboard
using (4) 2" Bolts and secure with Washers & Hex Nuts.
(Ensure the Caps are facing up on the PVC Supports)
Step 2
• Attach the hoop to the Backboard by inserting (1) 2’’
Bolt through center hole of the backboard hoop
bracket and secure with washers and hex nuts.
Do not tighten yet.
Step 3
• Complete the attachment of the Hoop to the
Backboard by inserting (2) 2 ½’’ Bolts through the
top two holes of the Hoop Bracket. Secure with
washers and hex nuts.
Step 4