Poolmaster 86233 Aqua Launch Slide - Manual

A
ssembly I
nstr
uc
tions
rev 05281401
Aqua Slide
86231 / 86233
Product Care & Storage
1. Remove from pool when not in use.
2. Rinse with plain water after each use.
3. Store in a dry place away from direct sunlight
and pool chemicals.
Step 1. Fill the main slide with air.
Step 2. Fill the rails with air.
Step 3. Fill the front water float with air and tie to main
slide as shown. Place it in the pool water so that
the back edge is against the edge of the pool.
Step 4. Situate the back ballast on the pool deck and tie to
main slide as shown and fill with water to weigh
the slide in place.
Step 5. Securely attach a garden hose to the attachment
on the slide and turn on the water.
Rails
Contents: 1 Slide, 1 Ballast, 1 Water Float, 4 Ropes (2) 3.5ft / (2) 5ft
(approximate size)
Main Slide
Back Ballast
3.5 ft Rope
Front Water Float
Hose
Attachment
Garden Hose
Edge of
Pool Deck
Pool Water
5 ft Rope
knot
knot
knot
knot
1
3
4
5
2
Electric Pump Recommended (not included)
Need Assistance?
Call our Customer Service Line:
Visit our website @ poolmaster.com
eMail us @ [email protected]
800.854.1492
770 Del Paso Road, Sacramento, CA 95834-0308