Penske Racing Shocks PS-Mustang-Strut - Manual (Page 9)

4.
Remove inner tube assembly from outer tube by pulling inner tube out.
5.
Depressurize tube assembly at this point. Remove valve cap from inflation unit
valve core.
6.
Hold inner tube assembly in
the proper spanner wrench
removing shaft assembly from body, install
Mustang Strut
9
Remove inner tube assembly from outer tube by pulling inner tube out.
Depressurize tube assembly at this point. Remove valve cap from inflation unit
Hold inner tube assembly in vise using flats on body cap or using inner body clamp.
the proper spanner wrench (f), unthread the shaft bearing (g) from the inner body.
removing shaft assembly from body, install TL-45RNG (h) to capture any oil overflow.
(g)
(h)
(f)
2011/2012
Depressurize tube assembly at this point. Remove valve cap from inflation unit (e) and depress
using flats on body cap or using inner body clamp. Then using
from the inner body. Before
to capture any oil overflow.
(e)