Paragon 2028 Series-Single Water Vessel Warmers - Manual (Page 8)

8
UNIT TAKE DOWN
1. Turn the switch to the “OFF” position and unplug the power cord.
CAUTION: Unit may still be hot.
2. Remove pumps, lids, jars, risers or No. 10 can.
3. Pour water out of water vessel by tipping the unit over.
WARMER CARE
It is recommended that the warmer be cleaned out daily using suitable cleaners that may be used on
food service equipment.

Always make sure the machine is off and unplugged before cleaning.
NEVER use water on the electrical components in the base.
GENERAL SERVICE, REPAIR AND RETURNS
Before returning any Paragon item, you must call the customer service department to receive return
authorization. Failure to do this may result in reduced or no return credit. Customer service will provide
instructions on how to ship the unit back. Paragon has a well-qualified, highly-skilled technical support
staff. We value service and are always willing to help.
The supply cord cannot be replaced and if the cord is damaged the appliance should be scrapped.