Paragon 2029 Series-Dual Water Vessel Warmers - Manual (Page 5)

5
ELECTRICAL REQUIREMENTS
This product requires a properly-grounded 120 volt supply with a 15 amp circuit. This Paragon Warmers
have a current draw of 8.3 amps or 1034 watts. (Export voltage is 230VAC.)
Extension cords may create a safety hazard and reduce its performance.
Be sure outlet accepts three (3) prong grounded plug. DO NOT use a three (3) prong to two (2) prong
adapter.
UNPACKING
Paragon carefully inspects each product during assembly and after completion to adhere to strict quality
guidelines, and packs it securely to ensure safe delivery to each of our customers. Be sure to carefully
remove all packing material and adhesive before any operation. Please examine your product to guarantee
all equipment has arrived, complete and in good condition.
If you believe that any damage may have occurred during shipment or parts may be missing, please
contact Paragon immediately for replacement.
CLEANING
Before using the unit for the first time, make sure unit is disassembled and cleaned properly. This also
includes being done after each time the unit is used. Stainless steel parts can corrode so it is important to
properly clean, rinse, sanitize and dry all parts daily or after each use. Failure to comply with these
instructions may result in a void warranty.
See separate pump manual for specifics on pump maintenance and cleaning.
BE AWARE
BE AWARE OF THE PRODUCT YOU ARE DISPENSING AND ITS TEMPERATURE MAINTAINING
REQUIREMENTS. Paragon International will not be responsible for dispensing of potentially hazardous
product.