Paragon 2290110 (230 volts) LARGE WARMER - Manual (Page 5)

OPERATING INSTRUCTIONS
1. Apply the appropriate decals (popcorn, nachos, or peanuts) to the front and rear glass
panels by peeling off the backing paper and applying to the glass.
2. Position the warmer on the counter top to provide the user accessibility to the dispensing
door.
3. Load the warmer with the correct product for the label designation through the top loading
door.
4. Turn on the lighted power switch. This will turn on the heating element in the base of the unit
and will keep your product warm and fresh.
5. Keep the power switch in the off position when the warmer is empty or not being used.
6. To remove product from the warmer, swing the dispensing door outward and use a scoop to
remove and package the product.
WARNING: Always turn the POWER switch to OFF when the machine is not in use.
WARMER CARE
It is recommended that the warmer be cleaned out daily using suitable cleaners that may be used on
food service equipment.
• Always make sure the machine is off and unplugged before cleaning.
• The dispensing door and the bottom tray are removable for easy cleaning and are
dishwasher safe due to the stainless steel construction.
• The tempered glass panels can be cleaned with a vinegar and water solution. The use of
ammonia based cleaners is not recommended.
NEVER use water on the electrical components in the base.
5