ACS EXP-06E User Manual
Page 4

EXP-06E Access Control System Installation Instruction
Satcom Systems (International) Co., Ltd.
4
3. EXP-06E Access Controller Configuration
I/O Capacities
IN
Reader -----------------------------
1
IN
Keypad -----------------------------
1
OUT
Reader
-----------------------------
1
Electric
Door
Lock Output
----------------------------- 1
Auxiliary
Relay
Output
----------------------------
1
Programmable
Relay Output
---------------------------- 1
Parallel
Printer
Port
-----------------------------
1
Door
Release
Button Input
----------------------------- 1
Door
Sensor
Input
-----------------------------
1
RS232
Communication Interface ----------------------------- 1
RS485
Communication Interface ----------------------------- 1
Memory Capacities
Cardholders & Transactions
--------------------------- 16,000
Access
Time
Zone
---------------------------
9
Pin
Entry
Time
Zone ---------------------------
3
Cardholder
Authority
Levels
---------------------------
3
Holidays
---------------------------
100
IN Reader
: Can be using LED Indication Lamp with Keypad
OUT Reader : Only LED Indication Lamp
System Characteristics
Multiple Technologies:
Supports Proximity and Magnetic Stripe Card
Selectable Acceptance Entrance Mode:
Card Only, Pin Code Only, Card + Pin Code
Complete Standalone:
Do not depend on other equipment for operation and programming.
Distributed Data:
Memory and processing located at every door. No degraded mode.
Optional Remote Terminal:
The optional remote terminal can be used for alarm monitoring and selected system
commands. The terminal can be located a few away or across the country via
modems.