MBRP S5510 - Manual (Page 2)

S5510 © 06/08 PAGE 2 OF 3
2002-2007 Jeep Liberty 2.4L- 3.7L
Removal of stock system:
1. Apply a penetrating lubricant liberally to all exhaust fasteners,
hangers and rubber insulators.
2. Cut the exhaust pipe after the muffler to be able to remove it
from the vehicle. Refer to Figure 1.
3. Remove the tail section of the exhaust by removing it from the
rubber isolators. Refer to Figure 2.
4. Remove the hardware from the flange and remove the muffler.
Refer to Figure 3.
Figure 1
Figure 2
Figure 3