MBRP S5226 - Manual (Page 2)

S5226 © 12/12 PAGE 2 OF 3
Removal of Stock System:
1. Apply a penetrating lubricant liberally to all exhaust fasteners, hangers and
rubber insulators.
2. Remove the bolts and springs holding the front flange together and
disconnect the exhaust system. Refer to Figure 1.
3. Remove the hangers from the rubber insulators and remove the exhaust from
the vehicle. Refer to Figures 2 & 3.
Installation of MBRP Inc. Performance Exhaust:
1. Now loosely attach the Extension Pipe to the flange using the Shank Bolts
and Springs provided. Refer to Figure 4.
Note: The Extension Pipe will need to be trimmed on some models, refer to
the illustration below.
Figure 1
Figure 2
Figure 3
Figure 4