MBRP S4200 - Manual (Page 4)

S4200 © 08/13 PAGE 4 OF 4
6. Install the Exhaust Tips onto the Tail Pipe. Ensure that the Tail Pipe is
level and the Exhaust Tips are centred in the fascia opening.
Refer to Figure 10.
7. Re-install the small cross member.
8. Align the exhaust as required. Pay particular attention to the location of the
Exhaust Tips and the Over Axle Pipe. Starting at the front of the exhaust,
tighten all clamps, hangers and connections. Ensure each joint is secure.
9. Check along the entire length of the exhaust system to ensure that there is
adequate clearance between the exhaust system and heat shields, cross
members, and body panels.
Congratulations! You are ready to begin experiencing the improved power, sound and driving experience of
your
MBRP Inc.
performance exhaust system. We know you will enjoy your purchase.
Figure 10