MBRP S6134 - Manual (Page 2)

S6134 © 02/10 PAGE 2 OF 3
2010 DODGE 6.7L Cummins, 2500/3500
Removal of Stock System:
1. Apply a penetrating lubricant liberally to all exhaust fasteners,
hangers and rubber insulators.
2. Loosen the nut on the clamps located behind the particulate
filter and behind the muffler using a 15mm wrench or socket.
Refer to Figure 1.
3. Remove the muffler and tail pipe from the OEM rubber hangers.
Remove the stock exhaust from vehicle. Refer to Figure 2.
Installation of MBRP Inc. Performance Exhaust:
1. The 4” to 5” Extension Pipe provided is the length used for
the Crew Cab Long bed. For all other models the Extension Pipe
must be cut. Refer to Figures 3 & 4.
Figure 4
Figure 1
Figure 2
Figure 3