MBRP S6285 - Manual (Page 3)

S6285 © 5/14 PAGE 3 OF 3
Figure 5
3. Install the Tail Pipe from the rear of the truck, over the axle and
attach to the Muffler outlet. Install the tail pipe hanger into the existing
rubber insulator.
4. Install and adjust the Exhaust Tip to suit.
6. Align the exhaust as required. Starting at the front of the exhaust, tighten
all clamps and connections.
7. Check along the whole length of the exhaust system to ensure that there is
adequate clearance around the spare tire, fuel and brake lines or any wiring. If
any interference is detected relocate or adjust.
Figure 6
Congratulations! You are ready to begin experiencing the improved performance and driving pleasure of your
MBRP Inc. performance exhaust system. We know you will enjoy your purchase.