MBRP GM8427 - Manual (Page 3)

GM8427 © 1/13 PAGE 3 OF 3
Congratulations! You are ready to begin experiencing the improved performance and driving pleasure of your
MBRP Inc. performance exhaust component. We know you will enjoy your purchase.
Figure 8
5. Reinstall the exhaust hanger to the transmission cross member.
Reinstall the transmission cross member. Reconnect all the sensors to
the front pipe.
6. Reinstall the passenger side inner fender.
7. Reinstall the turbo heat shield. Refer to Figure 10. Check along the
exhaust to make sure all connections and tightened. Check along the
whole length of the exhaust system to ensure that there is adequate
clearance around the spare tire, fuel and brake lines or any wiring. If
any interference is detected relocate or adjust.
Figure 9
Figure 10
V-Band Clamp