Manley SLAM! User Manual
Page 24
Input Tubes:
2 x 12AT7A NOS GE specially selected by Manley Labs for lo-noise and stable bias
Output Tubes:
2 x 6414W NOS USA dual triodes
I/O:
MANLEY transformer coupled Balanced Inputs and Outputs
Micpre:
Selectable 48V phantom power and PHASE REVERSE
Gain:
60dB max Micpre, 43dB max DI, 20dB max Limiter Gain
Input Impedance:
2000Ω Micpre, 1MegΩ DI
FET Limiter:
Attack: approx. 100μS; Release: 10mS to 2Sec; Ratio: better than 20:1
ELOP Limiter:
Attack: approx. 10mS for 6dB GR; Release: 2.5 Sec; Ratio: 10:1
Frequency Response: 5Hz to 60KHz
Maximum Output:
+32dBm, +30dBm (into 1KΩ load)
THD+N:
<.05% @ 1KHz
Dynamic Range:
115dB typical
Output Impedance:
200Ω
Power Consumption: 0.480 Amps (480 milliamps = 480mA) @ 120V = 57.6 Watts
0.240 Amps (240 milliamps = 240mA) @ 240V = 57.6 Watts
Outboard Power Supply: factory-set for original destination country’s mains voltage.
Operating Mains Voltage: changeable with power transformer re-wiring via switch and fuse value change.
Mains Voltage Frequency:50~ 60Hz
Size: 19” X 12” X 3.5” (occupies 2u)
Shipping Weight: 25 lbs.
24
SPECIFICATIONS