Ariston CDE 12x - Manual (Page 14)

M
ARGHERITA
Margherita - Instructions for installation and use 13
Mounting the wooden
panel onto the door and
inserting the machine
into cabinets:
In the case where the machine
must be shipped for final
installation after the wooden
panel has been mounted, we
suggest leaving it in its original
packaging. The packaging was
designed to make it possible to
mount the wooden panel onto
the machine without removing it
completely (see figures below).
The wooden panel that covers
the face of the machine must not
be less than 18 mm in thickness
and can be hinged on either the
right or left. For the sake of
practicality when using the
machine, we recommend that the
panel be hinged on the same side
as the door for the machine itself
- the left.
Door Mounting Accessories
(Fig. 1-2-3-4-5)
- No. 6 type A self-threading
screws, l =13 mm.
- No. 2 type B metric,
countersunk screws, l =25; for
fastening the magnet plate to the
cabinet.
- No. 4 type C metric screws,
l =15 mm; for mounting the hinge
supports to the cabinet.
- No. 4 type D metric screws,
l =7 mm; for mounting the hinges
on the supports.
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 5
A
B
C D
E
1
2
3
4
5
6
lavabiancheria
washing machine
machine
laver
waschmaschine
Lato porta
Door s ide
Cote p orte
Tur seite
1
2
3
4
5
6
lavabian
cheria
washing m
achine
machin
e laver
waschmaschine
Lato p orta
Door side
Cote porte
Tur s
eite
N° 2 Hinges
N° 1 Magnet N° 1 Magnet plate
N° 1 Rubber plug
N° 2 Hinge Supports
Instructions for the fitter
Fig. 4/B
N° 1 Spacer