Equus 3030 - CanOBD2 Car Reader - Manual (Page 13)

OBD2 11
Using the Car Reader
ERASING DIAGNOSTIC TROUBLE CODES (DTCs)
3. Press and release the Car Reader’s ERASE
button. The LCD display will indicate "SurE" for
your confirmation.
■ If you change your mind and do not wish to
erase the codes, press the LINK button to
return to the code retrieval function.
■ If you wish to continue, press the ERASE
button again. When all retrievable information,
including DTCs, has been cleared from the
computer’s memory, the Car Reader will re-link
to the vehicle’s computer, and the LCD display
will show "rEAd.”
Erasing DTCs does not fix the problem(s) that caused the code(s) to
be set. If proper repairs to correct the problem that caused the code(s)
to be set are not made, the code(s) will appear again (and the check
engine light will illuminate) as soon as the vehicle is driven long enough
for its Monitors to complete their testing.
E13