Cyron Lighting HTP1502E - Manual (Page 5)

5
“MODE” button cycles
through 14 functions as
shown in the diagram.
Press of a button is
confirmed by a short fast
blink of the Indicator
Light. “PAUSE” button
will stop the color
transition in any of the
color transition or color
fade modes.
In Music modes, which
are clearly identified by
flashing blue lights( MM1), or solid red light (MM2), the lights interact with ambient
sound. The dial on the side of the controller will adjust the sensitivity to the sound.
Keep in mind the location of the controller could greatly affect the amount of sound
picked up.
Optional Settings
Turn LED System ON when an outlet is switched on: Plug the power supply to a
switched power source such as audio receiver’s “Switched Power” or wall outlet that
is controlled by a wall switch. Make sure the outlet is switched on. Using the POWER
button on the controller, make sure the LED System is off . Press and hold the MODE
button for 3 seconds. Now the unit will turn on automatically every time the outlet is
turned on.
LED System remains OFF when an outlet is switched on: In a similar process, press
and hold the PAUSE button for 3 seconds. The system will remain off every time the