Cyron Lighting HTW310RF RGB - Manual (Page 2)

9439 IRONDALE AVE., CHATSWORTH, CALIFORNIA 91311 USA www.CYRON.com
RGB Controller, RF Remote
HTW310RF
Thank you for purchasing CYRON HTW310RF RF Controller. Please follow all the
steps to assure proper installation and optimum usage of this device. Please review all
instructions once before you start your project.
Contents _____
Please locate all system components. If any of the components are missing or
damaged contact CYRON before proceeding with installation.
Controller Remote control
Specifications _____
Supply voltage range 9-14VDC
Max output power* <100W @ 12VDC
Working Temperature -20 to 60ºC
Common terminal Anode
Standby power 0.5W
* Use CYRON HRP306 data repeater in conjunction for higher power ratings.
Possibilities _____
CYRON HTW310RF is compatible with all CYRON RGB lights. The controller is equipped
with terminal blocks which allow hardwiring the system without the use of CYRON Media
Highlighter standard connectors.
Hardwiring needs ample knowledge of wiring practices and should be done by
experienced professionals such as electricians or certified custom electronic installers. Please
contact CYRON Technical Support for further details.
You may choose to use CYRON part number HTHUB6 (not included) to create a 6-
outlet hub for this controller. This will facilitate connecting CYRON Media Highlighter
lightbars.
Installations _____
 Keep the controller and wires away from extreme heat, liquids, and moving objects.
 Low voltage wires can be routed through walls and cabinets as long as proper care is taken to
avoid damages.

DO NOT modify internal components. Tampering with components and wiring will void factory
warranty.