Clinton Electronics CE-PTZ10x - Manual (Page 18)

18
TIME RUNNING
The time running function is a scheduled start for predefined action, such as preset
tour, scan tour, etc. This PTZ supports up to 4 schedules. Before setting this function,
please make sure that the system time has been set correctly (see clock setting; pg14)
[TIME CHANNEL]: Current schedule number
[START TIME]: Start time of selected schedule as defined in [TIME CHANNEL]
[END TIME]: End time of selected schedule as defined in [TIME CHANNEL]
[RUNNING]: Define the action to be started. Select None to deactivate the function.
[BACK]: Move to previous screen (doing so will save your changes to time running)
[EXIT]: Exit the OSD (doing so will save your changes to time running)
The Window Blanking function is used to protect the privacy in the observed area, as
this may be required by law for certain applications. It is also known as “Privacy Masking”,
which covers the selected area with a blank window. This PTZ supports up to 25 masking
windows.
[WINDOW NUMBER]: Current window number
[EDIT WINDOW]: Edit the current masking window as defined in [WINDOW NUMBER]
1. Center the area you wish to mask on the screen by using the joystick.
2. Press iris open to enter window blanking edit.
3. Use the [UP], and [DOWN] movements to increase or decrease the height of
the window mask.
4. Use [LEFT], or [RIGHT] to decrease or increase the width of the window mask.
5. Press [IRIS OPEN] to save the mask.
[CLEAR WINDOW]: Clear the current masking window as defined in [WINDOW NUMBER]
[BACK]: Move to previous screen (doing so will save your changes to time window
blanking)
[EXIT]: Exit the OSD (doing so will save your changes to window blanking)
TIME RUNNING
- - - - - - - - - - - - - - - - - -
TIME CHANNEL 1
START TIME 00:00
END TIME 00:00
RUNNING NONE
BACK
EXIT
WINDOW BLANKING
- - - - - - - - - - - - - - - - - -
WINDOW NUMBER 01
EDIT WINDOW -->
ENABLE WINDOW ON
CLEAR WINDOW
BACK
EXIT
Window Blanking