Clinton Electronics CE-VF540 - Manual (Page 15)

11
EXPOSURE
1. When the SETUP menu is displayed, select ‘EXPOSURE’ by using the Up and
Down buttons so that the arrow indicates ‘EXPOSURE’. Press SETUP to enter.
2. Select the desired mode using Up and Down buttons.
BRIGHTNESS: Adjusts the exposure brightness.
SHUTTER : You can select either auto or manual shutter.
– A.FLK
: Select this when you experience picture flicker, which can
happen when there is a clash with the frequency of the
installed lighting.
– ESC : Select this to control the shutter speed automatically. If ESC
is selected, the shutter speed is automatically controlled
depending on the ambient illumination of the subject.
– MANUAL : You can control shutter speed manually. (1/60 ~ 1/120,000)

