4 system agent configuration, System agent configuration, Chapter 3 – Asus DELUXE P8Z77-V User Manual
Page 104: S.m.a.r.t. status check [enabled, Hot plug [disabled, Graphics configuration [auto, Primary display [auto, Render standby [enabled
ASUS P8Z77-V DELUXE
3-23
Chapter 3
S.M.A.R.T. Status Check [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When
read/write of your hard disk errors occur, this feature allows the hard disk to report warning
messages during the POST.
Configuration options: [Enabled] [Disabled]
Hot Plug [Disabled]
These items appear only when you set the SATA mode item to [AHCI Mode] or [RAID Mode],
and allow you to enable/disable SATA Hot Plug Support.
Configuration options: [Disabled] [Enabled]
3.5.4
System Agent Configuration
Memory Remap Feature [Enabled]
Allows you to enable remapping the memory above 4GB.
[Enabled]
Enables the function.
[Disabled]
Disables this function.
Graphics Configuration [Auto]
Allows you to select a primary display from iGPU, and PCIe graphical devices.
Primary Display [Auto]
Allows you to select which of the iGPU/PCIE Graphics device should be the Primary Display.
Configuration options: [Auto] [IGPU] [PCIE]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the iGPU.
Render Standby [Enabled]
Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU power
use when idle.
Configuration options: [Disabled] [Enabled]
Main
Ai Tweaker
Advanced
Monitor
Boot
Tool
Enable or disable memory remap above
4G.
Back
Advanced\
System Agent Configuration >
UEFI BIOS Utility - Advanced Mode
System Agent Bridge Name
IvyBridge
Memory Remap Feature
Enabled
> Graphics Configuration
> NB PCIe Configuration