Lifetime warranty information, Service information – American Fibertek MR-91P088SL User Manual
Page 4
A bi-color LED indicator is provided for the video output from the MR-91P088SL. DC power and video status
associated with this LED is summarized below.
Video Presence LED
DC Power Status
Video Status
Green
On
Proper Output Video Present
Red
On
Output Video Not Detected
Off
Off
Check Power Supply
OLI
A bi-color LED indicator monitors the optical input power of the data signal that is being received at the MR-
91P088SL from the MT-91P088SL or the RT-91P088SL. DC power and optical input status associated with this
LED are summarized below.
Optical Level Indicator
DC Power Status
Optical Status
Green
On
Proper Optical Input Power Present
Red
On
Optical Input Not Detected
Off
Off
Check Power Supply
SYNC
A bi-color LED indicator is provided to monitor the proper serialization of the optical data stream through the MR-
91P088SL and out onto the electrical interface. DC power and sync status associated with this LED is
summarized below.
Sync LED
DC Power Status
Sync Status
Green
On
Proper Data Stream Serialization Present
Red
On
Data Stream Serialization Not Detected
Off
Off
Check Power Supply
LIFETIME WARRANTY INFORMATION
American Fibertek, Inc warrants that at the time of delivery the products delivered will be free of defects in
materials and workmanship. Defective products will be repaired or replaced at the exclusive option of American
Fibertek. A Return Material Authorization (RMA) number is required to send the products back in case of return.
All returns must be shipped prepaid. This warranty is void if the products have been tampered with. This warranty
shall be construed in accordance with New Jersey law and the courts of New Jersey shall have exclusive
jurisdiction over this contract. EXCEPT FOR THE FOREGOING WARRANTY, THERE IS NO WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE, EXPRESSED OR
IMPLIED, WHICH EXTENDS BEYOND THE WARRANTY SET FORTH IN THIS AGREEMENT. In any event,
American Fibertek will not be responsible or liable for contingent, consequential, or incidental damages. No
agreement or understanding, expressed or implied, except as set forth in this warranty, will be binding upon
American Fibertek unless in writing, signed by a duly authorized officer of American Fibertek.
SERVICE INFORMATION
There are no user serviceable parts inside the unit.
In the event that service is required to this unit, please direct all inquiries to:
American Fibertek, Inc.
Phone: (877) 234-7200
120 Belmont Drive
Phone: (732) 302-0660
Somerset, NJ 08873
FAX (732) 302-0667
4