American Fibertek RR-940SL User Manual
Page 3
3
RR-940SL STATUS INDICATORS
The RR-940SL receiver provides the following LED status indicators described below to aid in
installation and troubleshooting:
VLI 1 THROUGH VLI 4
A bi-color LED indicator is provided for each of the four video outputs of the RR-940SL. DC
power and video status associated with each of these LED’s are summarized below.
Video Presence LED
DC Power Status
Video Status
Green
On
Proper Output Video Present
Red
On
Output Video Not Detected
Off
Off
Check Power Supply
OLI
A bi-color LED indicator monitors the optical input power of the data signal that is being
received at the RR-940SL from the MT-940SL or the RT-940SL. DC power and optical input
status associated with this LED are summarized below.
Optical Level Indicator
DC Power Status
Optical Status
Green
On
Proper Optical Input Power Present
Red
On
Optical Input Not Detected
Off
Off
Check Power Supply
SYNC
A bi-color LED indicator is provided to monitor the proper serialization of the electrical data
stream through the RR-940SL and out onto the fiber. DC power and sync status associated
with this LED is summarized below.
Sync LED
DC Power Status
Sync Status
Green
On
Proper Data Stream Serialization Present
Red
On
Data Stream Serialization Not Detected
Off
Off
Check Power Supply