American Fibertek RT-940D-SL - Manual (Page 2)

2
INSTALLATION AND OPERATION INSTRUCTIONS
INTRODUCTION
Thank you for purchasing your American Fibertek RT-940D-SL singlemode four channel video
transmitter with diagnostic interface. Please take a few minutes to read these installation
instructions in order to obtain the maximum performance from this product.
FUNCTIONAL DESCRIPTION
The RT-940D-SL operates as half of a transmitter / receiver pair for the transmission of four
channels of high performance 10 bit digital NTSC, PAL, RS170, or RS343 video signals. The
RT-940D-SL is designed to operate with the RR-940D-SL video receiver over one singlemode
fiber optic cable. The 940D-SL Series product is designed to operate over an optical loss
budget range of 0 to 21 dB. Refer to the data sheets for detailed performance specifications.
This unit is designed for rack mounting in the American Fibertek SR-20D/2 subrack. Slide in
rack mounting, detachable terminal blocks, and LED indicators provide for easy installation and
monitoring of video and optical power.
The RT-940D-SL has a built in capability to be remotely monitored through the AFINETY
Remote Diagnostics System. A SR-20D/2 subrack and a RD-20D diagnostic card are required
to facilitate this feature. Please refer to the SR-20D/2 and RD-20D Instruction Manuals for
proper operation of this feature.
INSTALLATION
THE INSTALLATION OF THIS UNIT SHOULD BE MADE BY A QUALIFIED SERVICE
PERSON(S) AND MUST CONFORM TO ALL LOCAL CODES.
A maximum of seven 940D-SL units are recommended in one subrack. Forced air movement is
required to dissipate heat in any installation containing seven or more 940D-SL units in one
subrack.