American Fibertek MT-980C-SL User Manual
Page 3
3
FIBER CONNECTION
The fiber optic connection is made via a FC/PC connector located on the right side of the unit.
Be sure to allow sufficient room for the required minimum bend radius of the fiber cable used.
VIDEO INPUT CONNECTIONS
The video input connections are made via BNC connectors on the right side of the unit. The
video input should be connected to an appropriate 75
baseband video source such as a
camera or a video recorder output. For optimum performance the video cables should be the
shortest length of coax practical
MT-980C-SL STATUS INDICATORS
The MT-980C-SL transmitter provides the LED status indicators to aid in installation and
troubleshooting:
VIDEO 1 THROUGH VIDEO 8
A bi-color LED indicator is provided for each of the eight video inputs of the MT-980C-SL.
DC power and video status associated with each of these LED’s are summarized below.
Video Presence LED
DC Power Status
Video Status
Green
On
Proper Input Video Present
Red
On
Input Video Not Detected
Off
Off
Check Power Supply