American Fibertek RR-93200C-SL - Manual (Page 4)

4
RR-93200C-SL COMPONENTS
The RR-93200C-SL consists of the following components:
1) RR-980C-1470
1) RR-980C-1530 1) SR-20
1) RR-980C-1490 4) PCSC/UPC-0.4 1) PSR-2
1) RR-980C-1510 1) RR-CWDM-4 2) BPS-2
The individual 980C series video rack cards that make up the RR-93200C-SL are installed in a
manner similar to the RT-93200C-SL (see drawing below). The Multi-Channel Digital Video
CWDM that optically demultiplexes the four video rack cards used in the RR-93200C-SL is
labeled RR-CWDM-4. Mounting procedures and recommendations should follow those used for
the RT-93200C-SL.
POWER SOURCE
Power to the 980C series rack cards is supplied by the subrack. Please refer to the SR-20 and
PSR-2 instructions for further details.
POWER CONNECTIONS
Power is supplied to the individual 980C series units via a four finger backplane connector. The
individual components can be inserted into the subrack or removed from the subrack with power
applied to the backplane. Please refer to the SR-20 and PSR-2 instructions for details.
a fi a f i afi afi a fi a f i