American Fibertek MT-984C-SL - Manual (Page 4)

4
VIDEO INPUT CONNECTIONS
The video input connections are made via BNC connectors on the unit. The video input should be
connected to an appropriate 75
 baseband video source such as a camera or a video recorder output.
For optimum performance the video cables should be the shortest length of coax practical.
DATA INPUT / OUTPUT CONNECTIONS
Data input and output connections are made via a terminal block on the unit. Follow the drawings below
for proper orientation of input and output connections. Please note that the far left pin on each
connection drawing corresponds with the far left pin on the terminal block. For example RS485 DATA
IN + is pin 5 as shown above and on the label.