American Fibertek MTM-1400 User Manual
Page 4
4
VLI
A bi-color LED indicator is provided for the video input to the MTM-1400. DC power and video status
associated with this LED is summarized below.
Video Presence LED
DC Power Status
Video Status
Green
On
Proper Input Video Present
Red
On
Input Video Not Detected
Off
Off
Check Power Supply Input
DATA TX
A green LED indicator is provided to monitor the RS422 input data from the electrical interface, through the
MTM-1400, and out onto the fiber. The intensity of this indicator will vary with input data patterns, however
in typical applications it will cycle on and off as data is transmitted. RS422 status associated with this LED
is summarized below.
DATA TX LED
RS422 Status
Green
Data Flow Present
Off
Data Flow Not Detected
DATA RX
A green LED indicator is provided to monitor the RS422 data coming in from the fiber, through the MTM-
1400, and out onto the electrical interface. The intensity of this indicator will vary with input data patterns,
however in typical applications it will cycle on and off as data is received. RS422 status associated with this
LED is summarized below.
DATA RX LED
RS422 Status
Green
Data Flow Present
Off
Data Flow Not Detected
LIFETIME WARRANTY INFORMATION
American Fibertek, Inc warrants that at the time of delivery the products delivered will be free of defects in
materials and workmanship. Defective products will be repaired or replaced at the exclusive option of
American Fibertek. A Return Material Authorization (RMA) number is required to send the products back in
case of return. All returns must be shipped prepaid. This warranty is void if the products have been
tampered with. This warranty shall be construed in accordance with New Jersey law and the courts of New
Jersey shall have exclusive jurisdiction over this contract. EXCEPT FOR THE FOREGOING WARRANTY,
THERE IS NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR
OTHERWISE, EXPRESSED OR IMPLIED, WHICH EXTENDS BEYOND THE WARRANTY SET FORTH
IN THIS AGREEMENT. In any event, American Fibertek will not be responsible or liable for contingent,
consequential, or incidental damages. No agreement or understanding, expressed or implied, except as set
forth in this warranty, will be binding upon American Fibertek unless in writing, signed by a duly authorized
officer of American Fibertek.
SERVICE INFORMATION
There are no user serviceable parts inside the unit.
In the event that service is required to this unit, please direct all inquiries to:
American Fibertek, Inc.
Phone: (877) 234-7200
120 Belmont Drive
Phone: (732) 302-0660
Somerset, NJ 08873
FAX (732) 302-0667
E-mail: