American Fibertek RR-404C - Manual (Page 2)

2
INSTALLATION AND OPERATION INSTRUCTIONS
INTRODUCTION
Thank you for purchasing your American Fibertek RR-404C multimode four channel video
receiver. Please take a few minutes to read these installation instructions in order to obtain the
maximum performance from this product.
FUNCTIONAL DESCRIPTION
The RR-404C operates as half of a transmitter / receiver pair for the transmission of four
simultaneous, real time, baseband NTSC, PAL, RS170, or RS343 video signals. The RR-404C
is designed to operate with the MT-404C or RT-404C video transmitter over one multimode fiber
optic cable.
The RR-404C receiver converts a single optical input into a maximum of four video outputs. The
404C Series product is designed to operate over an optical loss budget range of 0 to 6 dB and a
maximum distance of 2.5km when used on 62.5 um multimode fiber. The RR-404C will also
operate on 50 um multimode fiber at a reduced loss budget range. Refer to the product
specification sheet for additional performance data.
This unit is designed for rack mounting in any of the four American Fibertek subracks available.
The subrack model numbers are SR-20/1, SR-20R/1, SR-20/2, and SR-20D/2. Slide in rack
mounting and LED indicators provide for easy installation and monitoring of video and dc power.
The RR-404C is designed for rack mounting only. For a modular stand alone version please see
the MR-404C.
INSTALLATION
THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND
SHOULD CONFORM TO THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 AND LOCAL
CODES.