American Fibertek MRX-8410C-SL - Manual (Page 6)

6
MTX-8410C-SL STATUS INDICATORS
The MTX-8410C-SL transmitter provides the following front panel LED status indicators
to aid in installation and troubleshooting:
DATA
These indicators turn green when any data activity is present. An active DATA 1 LED
indicates data is present at the input /output terminals of the MTX-8410C-SL. An active
DATA 2 LED indicates the MTX-8410C-SL has seized the data carrier to allow data flow.
The intensity of the indicators will vary with input / output data patterns, however, the Tx
and Rx Carrier Detect LEDs will typically appear dimmer than the Sensornet Tx and Rx
LEDs. The data activity associated with these front panel DATA LEDs are listed below.
DATA 1 TX DATA 1 RX DATA 2 TX DATA 2 RX
Sensornet Tx Sensornet Rx Tx Carrier Detect Rx Carrier Detect
OLI
A bi-color LED indicator monitors the optical input power of the data signal that is being
received at the MTX-8410C-SL from the MRX-8410C-SL. AC power and optical input
status associated with this LED are summarized below.
Optical Level Indicator AC Power Status Optical Status
Green On Proper Optical Input Power Present
Red On Optical Input Not Detected
Off Off Check Power Supply Input
VIDEO
A bi-color LED indicator is provided for each of the four video channel inputs. AC power
and video status associated with each of these LEDs are summarized below.
Video Presence LED AC Power Status Video Status
Green On Proper Input Video Present
Red On Input Video Not Detected
Off Off Check Power Supply Input