American Fibertek MRX-8406C - Manual (Page 5)

5
MRX-8406C STATUS INDICATORS
The MRX-8406C receiver provides the following front panel LED status indicators to aid in installation
and troubleshooting:
CONTROL
A bi-color LED indicator is provided for each of the four control data channel inputs. Control data status
associated with each of these LEDs are summarized below.
Control Presence LED Control Data Status
Green Proper Input Control Data Present
Off Control Data Input Not Detected
OLI
A bi-color LED indicator monitors the power of the optical input signal that is being received at the MRX-
8406C from the video channels of the MTX-8406C. AC power and optical input status associated with
this LED are summarized below.
Optical Level Indicator AC Power Status Optical Status
Green On Proper Optical Input Power Present
Red On Optical Input Not Detected
Off Off Check Power Supply Input
LIFETIME WARRANTY INFORMATION
American Fibertek, Inc warrants that at the time of delivery the products delivered will be free of defects
in materials and workmanship. Defective products will be repaired or replaced at the exclusive option of
American Fibertek. A Return Material Authorization (RMA) number is required to send the products back
in case of return. All returns must be shipped prepaid. This warranty is void if the products have been
tampered with. This warranty shall be construed in accordance with New Jersey law and the courts of
New Jersey shall have exclusive jurisdiction over this contract. EXCEPT FOR THE FOREGOING
WARRANTY, THERE IS NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR OTHERWISE, EXPRESSED OR IMPLIED, WHICH EXTENDS BEYOND
THE WARRANTY SET FORTH IN THIS AGREEMENT. In any event, American Fibertek will not be
responsible or liable for contingent, consequential, or incidental damages. No agreement or
understanding, expressed or implied, except as set forth in this warranty, will be binding upon American
Fibertek unless in writing, signed by a duly authorized officer of American Fibertek.
SERVICE INFORMATION
There are no user serviceable parts inside the unit.
In the event that service is required to this unit, please direct all inquiries to:
American Fibertek, Inc.
Phone: (877) 234-7200
120 Belmont Drive Phone: (732) 302-0660
Somerset, NJ 08873 FAX (732) 302-0667
E-mail: [email protected]