TC Sounds Axis 15 - Manual (Page 3)

Installation Dimensions
Wire Configurations
Quad Voice Coil Series:
Quad Voice Coil Parallel: Quad Voice Coil Series-Parallel:
1Ω + 1Ω +1Ω + 1Ω = 4Ω
1Ω || 1Ω ||1Ω || 1Ω = 0.25Ω
1Ω + 1Ω || 1Ω + 1Ω = 1Ω
Top Assembly
The motor and top assembly are shipped in separate
boxes. Assembly screws and a hex key are included
with the motor to bolt on the top assembly. DO NOT
REST TOP ASSEMBLY ON VOICE COIL. Install the top
assembly slowly onto the motor to avoid scraping or
scratching the coil against the steel gap-plate.
The TC Sounds detachable top assembly makes potential
repairs a simple five minute process. This proprietary
procedure is by far the easiest and fastest way to recone
or repair a broken, damaged or destroyed driver. The
entire frame with all of the soft-parts can easily detach
from the motor and be replaced without glue, shims or any
risk of unaligned coils or user error. The top assembly
should fit snug over the steel gap-plate. Hand tighten the
hex screws with the included hex key and use the included
locking washers to prevent screws from loosening.