Autostart Keyless Entry And Alarm System ASL-500 - Manual (Page 4)

P. 4 User Guide
Parking Countdown
FUNCTION BY PRESSING ICON BUZZER
INSTRUCTIONS /
DESCRIPTION
+ 1 time Melody 10 MIN COUNT DOWN
+ 2 times Melody 20 MIN COUNT DOWN
+ 3 times Melody 30 MIN COUNT DOWN
+ 4 times Melody 60 MIN COUNT DOWN
+ 5 times Melody 90 MIN COUNT DOWN
+ 6 times Melody 120 MIN COUNT DOWN
FOR
PARKING
COUNTDOWN
+ 7 times Current time Melody
PARKING COUNT DOWN
OFF
Time or Alarm Clock Adjustments
User Transmitter
1. Press and hold the FUNCTION button until a
beep is heard.
The backlight will turn on the moment the
FUNCTION button is pressed.
2. Upon hearing the beep, release the FUNCTION
button. .................................. is displayed
3. Press and hold the FUNCTION button once
more.
4. Release the FUNCTION button when a beep is
heard. .................................. is displayed
5. Press and hold the FUNCTION button once
more until a beep is heard.
6. Release the FUNCTION button.
.................................. is displayed
7. At that point, press and hold the FUNCTION
button until 2 beeps are heard.
.............The hour setting will starts to flash.
Pressing the FUNCTION button
1X..................................................Adjust hour (current time)
2X..................................................Adjust minutes (current time)
3X..................................................Adjust hour (Alarm)
4X..................................................Adjust minutes (Alarm)
5X..................................................Melody selection for the ringing of the alarm
6X..................................................Activate (ON) / Deactivate (OFF) Alarm
7X..................................................Adjust hour (countdown)
8X..................................................Adjust minutes (countdown)
9X..................................................Melody selection for the countdown
10X................................................Activate (ON) / Deactivate (OFF) countdown
a. Press the button to increase the value or to activate or deactivate a function or to toggle
through the melodies.
b. Press the button to decrease the value or to activate or deactivate a function or to toggle
through the melodies.
c. To save modifications, do not touch any buttons for approx. 10 to 15 seconds. There will be a
beep and the display will return to the time.