Warning, Caution – Brewer Basic 4000/4001 User Manual

Page 13

Document #100087 RevC

MAINTENANCE

Preventative Maintenance

• Periodically inspect the electrical cord to ensure it is

free of cuts or damage.

• Inspect the mechanical functions to ensure satisfac-

tory operation.

• Check fasteners to make sure they are present and

secured tightly.

• Periodically inspect the levelers functions to ensure

satisfactory operation.

Cleaning

Upholstery

Regular care should be maintained by daily wiping with a

damp cloth or sponge and periodic cleaning with a mild

soap and water solution.

WARNING

The upholstery material that covers the top of the

table is resistant to most medicinal-type stains, but

may be damaged by solvents and dyes. Remove

any fluids which are spilled on the upholstery im-

mediately. All surfaces should be cleaned within

your facilities guidelines concerning antimicrobials

and bloodborne pathogens.

CAUTION

Turn off drawer warmer and let cool before remov-

ing or cleaning top front drawer. Failure to do so

could result in minor burns.

Painted Metal Surfaces

Wipe all painted metal surfaces with a clean cloth at least

once a week.

Drawers

Regular care should be maintained by wiping out drawers

with a damp cloth or sponge on a regular basis along with

periodic cleaning with a mild soap and water solution. The

drawers may be removed for cleaning.

Unpainted Metal Surfaces

Wipe all unpainted metal surfaces with a clean cloth. Use

FDA silicon lubricant on moving parts.

Tread on Footstep

The protective tread material should be cleaned periodi-

cally by a light scrubbing with a stiff brush, mild soap, and

water.