GE 169072 - Manual (Page 8)

8
Cleaning of filters
Pre-motor filter
1. remove the flexible hose from the canister, open the front cover and take out
the dust bag holder.
2. take out the pre-motor filter.
3. Clean the filter by
rinsing with tap
water. thoroughly
dry and install it
again.
note: make sure filter is completely dry before re-installation.
exhaust filter
1. Lift off the grill located on the back of
the vacuum
2. take out the HePA filter and clean with
round Brush (part e in Accessory Kit).
re-install it.
warning: please unplug the unit before
beginning any cleaning or maintenance
note: make sure that all filters and/or dust bag are in position before operation